Motorola MD1600 User Manual page 65


Use interface: Select an interface that you want to configure.

Select an application: Select a proper application in the drop-down list.

Custom application: Manually define an application.

Trigger port Start: The start port number that LAN uses to trigger the open
port.

Trigger port End: The end port number that LAN uses to trigger the open
port.

Trigger Protocol: Select the application protocol. You may select TCP/UDP,
TCP, or UDP.

Open Port Start: The start port number that is opened to WAN.

Open Port End: The end port number that is opened to WAN.

Open Protocol: Select the proper protocol that is opened to WAN. You may
select TCP/UDP, TCP, or UDP.
After finishing setting, click Save/Apply to apply the settings.
Note:
User Manual
61