Motorola MD1600 User Manual page 102


RADIUS Server IP Address: Enter the IP address of the RADIUS server.
RADIUS server is used to authenticate the hosts on the wireless network.

RADIUS Port: The port number that the RADIUS server uses. The default
port number is 1812. You may change it according to the server setting.

RADIUS Key: Set the RADIUS key for accessing the RADIUS server.

WEP Encryption: You can only select Enabled.

Encryption Strength: You can set 64-bit or 128-bit key.

Current Network Key: The current key that you use.

Network Key1/2/3/4: Set the network key. If it is 128-bit key, you need to
enter 13 ASCII characters or 26 hexadecimal digits. For the 64-bit key, you
need to enter 5 ASCII characters or 10 hexadecimal digits.
-
WPA Mode

Select SSID: Select a SSID for configuring the security settings.

Network Authentication: Select the WPA-PSK mode.

WPA Group Rekey Interval: Setting the interval for renewing key.

RADIUS Server IP Address: Enter the IP address of the RADIUS server.
RADIUS server is used to authenticate the hosts on the wireless network.

RADIUS Port: The port number that the RADIUS server uses. The default
port number is 1812. You may change it according to the server setting.

RADIUS Key: Set the RADIUS key for accessing the RADIUS server.

WPA/WAPI Encryption: You may select AES, or TKIP+AES.
User Manual
98