Chassis Weight; Processor Specifications; Psu Specifications; System Battery Specifications - Dell PowerEdge E31S Series Owner's Manual

Table 15. Dimensions of the Dell PowerEdge R730 system
Xa Xb
482.4 mm 444.0 mm

Chassis weight

This section describes the weight of the system.
Table 16. Chassis weight
System
PowerEdge R730

Processor specifications

The PowerEdge R730 system supports up to two Intel Xeon E5-2600 v3 or Intel Xeon E5-2600 v4 product family processors.

PSU specifications

The PowerEdge R730 system supports up to two AC or DC redundant power supply units (PSUs).
Table 17. PSU specifications
PSU Class
495 W AC Platinum
750 W AC Platinum
Titanium
1100 W AC Platinum
750 W DC (for China Platinum
only)
1100 W DC N/A
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 230
V.

System battery specifications

The PowerEdge R730 system supports CR 2032 3.0-V lithium coin cell system battery.

Expansion bus specifications

The PowerEdge R730 system supports PCI express (PCIe) generation 3 expansion cards, which need to be installed on the
system board using expansion card risers. This system supports three types of expansion card risers. The following table
provides the expansion card riser specifications:
28 Technical specifications
Y Za (with
bezel)
87.3 mm 32.0 mm
Maximum weight (with all hard drives/SSDs)
● 31.5 kg (69.45 lb) (3.5-inch hard drive systems)
● 31.4 kg (69.23 lb) (2.5-inch hard drive systems)
Heat dissipation
(maximum)
1908 BTU/hr
2891 BTU/hr
2843 BTU/hr
4100 BTU/hr
2902 BTU/hr
4416 BTU/hr
Za (without Zb
bezel)
18.0 mm 684.0 mm
Frequency Voltage
50/60 Hz 100–240 V AC, autoranging
50/60 Hz 100–240 V AC, autoranging
50/60 Hz 200–240 V AC, autoranging
50/60 Hz 100–240 V AC, autoranging
100–240 V AC and 240 V DC
N/A –(48–60) V DC
Zc
723.0 mm