Usata Ssd Indicator Codes - Dell PowerEdge E31S Series Owner's Manual

Table 6. Hard drive indicator codes (continued)
Drive-status indicator pattern
Flashes green, amber, and then turns off
Flashes amber four times per second
Flashes green slowly
Steady green
Flashes green for three seconds, amber for three
seconds, and then turns off after six seconds

uSATA SSD indicator codes

Figure 7. uSATA SSD indicators
1. uSATA SSD activity indicator
2. uSATA SSD status indicator
3. uSATA SSD
NOTE: If the SSD is in the Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side) does
not function and remains off.
Table 7. Drive status indicator codes
Drive-status indicator pattern
Flashes green twice per second
Off
Flashes green, amber, and turns off
Flashes amber four times per second
Steady green
Flashes green for three seconds, amber for three
seconds, and turns off after six seconds
Condition
NOTE: The drive status indicator remains off until all hard
drives are initialized after the system is turned on. Drives are
not ready for insertion or removal during this time.
Predicted drive failure
Drive failed
Drive rebuilding
Drive online
Rebuild stopped
Condition
Identifying drive or preparing for removal.
Drive ready for insertion or removal.
NOTE: The drive status indicator remains off until all hard
drives are initialized after the system is turned on. Drives are
not ready for insertion or removal during this time.
Predicted drive failure
Drive failed
Drive online
Rebuild aborted
Dell PowerEdge R730 system overview 19