Mux Diagram For Vin2A And Emu; Soc Pinmux For Vin2A And Rgmii1 - Texas Instruments DRA72 Series User Manual

Signal Multiplex Logic
Mux E: Selects between LI camera and expansion, as shown in
the IO expander #3, and bits P6 and P2. The default mode is set to expansion.
SoC
4.5 VIN2A and RGMII1 Selection (Mux F)
Figure 15 is part of the SoC pinmux table for VIN2A. The SoC device supports additional functions not
shown in the table. The functions shown are intended to reflect those supported on the EVM. These
include:
• Video Input Port (VIN2A): D[23:10]
• Gig Ethernet (RGMII1): TXC, TXCTL, TXD[3:0], RXC, RXCTL, RXD[3:0]
• Management Data I/O (MDIO): MCLK, D
28
DRA72x EVM CPU Board User's Guide
A1=B2 or A1 = B3
CBT16214
A1
VIN2A_CLK, _VS, _HS, _DE,
Mux
_D[9:0]
B3
Figure 14. Mux Diagram for VIN2A and EMU
Figure 15. SoC Pinmux for VIN2A and RGMII1
Copyright © 2016, Texas Instruments Incorporated
Figure
B1
VIN2A
E
VIN2A_CLK, _VS, _HS, _DE, _D[9:0]
B2
VIN2A
VIN2A_CLK, _VS, _HS, _DE, _D[9:0]
14. The selection is made using
Expansion
Connector
LI Camera
Connector
SPRUIB9 – December 2016
Submit Documentation Feedback
www.ti.com