Removing The Main Board - Acer Veriton 3000 Service Manual

Removing the Main Board

1.
Disconnect the WOL cable, CD-ROM FPC cable, and IDE cable from the main board.
2.
Next, release the latches on the floppy disk drive connector on the main board and remove the cable.
3. Remove the power switch cable, network LED cable, power LED cable, and HDD LED cable from the
main board. ( The turbo LED cable does not indicate turbo function, however the light will still be on when
the unit is connected to a network. To prevent misleading of the indicator function , we call the cable as
network LED cable, except in Spare Part List.)
62 Chapter 3