Remove The Prime Contactor; Remove Din-Rail Bracket - Husqvarna WS440HF Workshop Manual

11
1
3
1
1 3 8
REPAIR INSTRUCTIONS
2
2
Remove the Prime
Contactor
Be sure to document where
all the wires are connected!
First see: Remove 15A fuse boxes
(p. 137)
1� If replacing the prime contactor,
mark and remove all the wires�
2� Remove the Prime Contactor by
puch to the left�
3� Then fold it out at the same time
to remove it�
Reverse step for assembling�
To reconnect wires see electrical
drawings in section: Wiring
Diagrams

Remove DIN-rail bracket

Be sure to document where
all the wires are connected!
First see: Remove the Prime
Contactor (p. 138)
1� Mark all the ground wires and
remove the 2 screws from the
DIN-rail bracket�
2� Remove the 4 screws to take off
the DIN-rail bracket�