Remove Feed Motor Gearbox - Husqvarna WS440HF Workshop Manual

10.3
1
3
5
6
1 0 2
REPAIR INSTRUCTIONS
2
4
7
Remove Feed Motor
Gearbox
First see: Remove Feed Motors (p.
101)
1� Use a pin punch to loosen the
gearbox if it is stuck�
2� Insert a bolt in the arm carrier
ring and rotate the disc to force
the arm gearbox out�
3� Use a screwdriver to rotate the
track wheel to force the track
gearbox out�
4� When the gearbox got enough
clearance from the house, unscrew
the gearbox by hand the last bit
and lift the gearbox out�
5� Unscrew the bottom bolt and
remove the worm screw with the
radial bearing from the planatary
gearbox�
6� Remove the four screws holding
the lid�
7� Remove the lid�