Installation And Connection - IKEA TILLREDA Manual

Hide thumbs Also See for TILLREDA:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
6. INSTALLATION AND
CONNECTION
Countertop Installation
Remove all packing material and
accessories. Examine the oven
for any damage such as dents
or broken door. Do not install if
oven is damaged.
Cabinet: Remove any protective
film found on the microwave
oven cabinet surface. Do not
remove the light brown Mica
cover that is attached to the
oven cavity to protect the
magnetron.
Installation
1. Select a level surface that
provide enough open space
for the intake and/or outlet
vents.
(1) The rear surface of appliance
shall be placed against a wall.
Leave a minimum clearance
of 11.5 cm above the oven, a
minimum clearance of 8 cm
is required between the oven
and any adjacent walls.
(2) Do not remove the legs from
the bottom of the oven.
(3) Blocking the intake and/ or
outlet openings can damage
the oven.
(4) Place the oven as far
away from radios and TV
as possible. Operation of
microwave oven may cause
interference to your radio or
TV reception.
2. Plug your oven into a
standard household outlet.
Be sure the voltage and the
frequency is the same as the
voltage and the frequency on
the rating label.
WARNING: Do not install oven
over a range cooktop or other
heat-producing appliance. If
installed near or over a heat
source, the oven could be
damaged and the warranty
would be void.
The accessible surface may be
hot during operation.
17

Advertisement

Chapters

Table of Contents
loading

Table of Contents