Table of Contents
Advertisement
GUI Application
4
GUI Application
4.1
Installation
Follow these steps to install the GUI application:
Step 1. Download and run theSetup_boostxldrv832x-1.0.0_EVM.exe installer file to install the GUI
application.
Step 2. Install the COM port driver for TI MSP430 USB (the firmware on MSP430F5529 LaunchPad
development kit plug-in module).
This driver is automatically installed during the GUI installation process. Click the Install button when the
window shown in
Figure 32
drivers are already installed.
20
BOOSTXL-DRV8323Rx EVM User's Guide
Figure 30. Error Initializing Emulator
Figure 31. Updating LaunchPad development kit Firmware
appears during the GUI installation. If this pop-up does not appear, then the
Copyright © 2017–2018, Texas Instruments Incorporated
SLVUB01C – February 2017 – Revised March 2018
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
