Table of Contents
Advertisement
Firmware Installation
Step 2. Read through and accept the license agreement to proceed with the installation (see
Figure
Step 3. Choose a destination directory. Using the default (c:\ti) removes a step in the SDK installation
procedure (see
Step 4. Choose the processor architectures to install (see
For the DRV83xx, the MSP430 and C28x are the only needed processor packages. The compiler tools
are required. Ensure that the box for the TI MSP430 Compiler Tool is checked.
10
BOOSTXL-DRV8323Rx EVM User's Guide
9).
Figure 9. CCS License Agreement
Figure
10).
Figure 10. Default Installation Location for CCS
Copyright © 2017–2018, Texas Instruments Incorporated
Figure
11).
SLVUB01C – February 2017 – Revised March 2018
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
