Table of Contents
Advertisement
Firmware Installation
3.3
Creating or Importing a DRV8x Project into CCS
When the CCS software is started, the user must first select a workspace. A workspace is the structure in
which projects are kept. Multiple projects can be saved in one workspace. TI recommends starting with
the project for the specific DRV8x device. After importing an existing project, the user can explore the
features of CCS to become familiar with the IDE. Follow these steps to import the provided project:
Step 1. Double click the CCS icon to open the application. A CCS icon is placed on the desktop after
installation.
Step 2. Select the location and name of the workspace. The location and naming convention can be
changed based on the user's preference (see
Step 3. Click the OK button to accept.
After selecting the workspace, the CCS software opens displaying a welcome menu.
Step 4. Import a project either from the welcome menu by selecting Import Project or go to the
Project menu and select Import Existing CCS Eclipse Project (see
Step 5. In the new window that appears showing the import options, click the Browse... button and
find the provided projects through the folder browser. These projects are located in the SDK
installation directory. The example location is C:\ti\DRV832XX-V1.0 (see
selected, the provided project appears under Discovered Projects.
Step 6. Make sure the correct box is checked and then click the Finish button (see
16
BOOSTXL-DRV8323Rx EVM User's Guide
Figure 22. Workspace Launcher
Figure 23. Importing Existing Projects
Copyright © 2017–2018, Texas Instruments Incorporated
Figure
22).
Figure
SLVUB01C – February 2017 – Revised March 2018
Submit Documentation Feedback
www.ti.com
23).
Figure
24). When
Figure
24.
Advertisement
Table of Contents
