Dimplex DCSS12 Instruction Manual page 14

OPERATING INSTRUCTIONS
TIMER MODE----TIMER ON
To set the time of the air conditioner
TIMER
To program the automatical switching-on time, the
appliance should be power off.
Press TIMER at the fist time , set the temperature with
pressing the button
Press TIMER at the second time , set the rest time with
pressing the button
Press TIMER at the third time, confirm the setting, then
the rest time to next automatical switching-on could be
read on the display.
NOTE !
Before proceeding with the time: program the working
mode with the button MODE (2) and the fan speed
with the button FAN
off (with the key ON/OFF ).
Note:To cancel the set function ,press the TIMER
button again.
Note:In case of power off,it is necessary to set TIMER
ON again
TIMER MODE----TIMER OFF
To set the automatic switching-off of
TIMER
the air conditioner
The timed stop is programmed by pressing TIMER ,
Set the rest time by pressing the
time displayed is to your demand then press
Note:To cancel the set function, press the TIMER
button again.
Note:In case of power off,it is necessary to set TIMER
OFF again
Note: When the time is set correctly on the
remote, the timer function can be used
and set in half hour increments.
or ;
or ;
(3) . Switch the conditioner
button
or ,until the rest
TIMER
POWER SLEEP
again.
POWER SLEEP
12
TIMER ON
RUN
TIMER
Indoor display
TIMER OFF
RUN
TIMER
Indoor display