Disassembling the Main Unit
Removing the Middle Covers
1.
See "Removing the Battery Pack" on page 47
2.
First, push outward the middle cover as shown here, and then detach the other middle cover on the rear
of the unit.
NOTE: The disassembly procedures of the middle covers are reversed due to the change of the material
which the middle covers are made of. Please ignore the disassembly procedures for this part in the
video.
Removing the Keyboard
1.
See "Removing the Battery Pack" on page 47
2.
See "Removing the Middle Covers" on page 50
3.
Remove the three screws, lift the keyboard upward, and then put it on the upper case as shown here.
4.
Disconnect the keyboard cable from the main board by using a plastic flat screwdriver and remove the
keyboard.
50
Chapter 3