Removing The Coaxial Cable; Removing The Sensor Board - Acer TravelMate C100 Service Manual

NOTE: Please do not detach the protection cover from the LCD. The intention to do so will cause the damage
to the protection cover and the LCD.

Removing the Coaxial Cable

1. See "Removing the Battery Pack" on page 47
2. See "Removing the Middle Covers" on page 50
3. See "Removing the Keyboard" on page 50
4. See "Removing the LCD Module" on page 51
5. See "Removing the LCD Bezel" on page 60
6. See "Removing the LCD" on page 62
7. Remove the tape, disconnect the coaxial cable, and then remove the coaxial cable from the LCD carefully.

Removing the Sensor Board

1. See "Removing the Battery Pack" on page 47
2. See "Removing the Middle Covers" on page 50
3. See "Removing the Keyboard" on page 50
4. See "Removing the LCD Module" on page 51
5. See "Removing the LCD Bezel" on page 60
6. See "Removing the LCD" on page 62
7. Remove the two golden screws, remove the tapes and then detach the sensor board from the LCD
carefully.
Chapter 3 63