Brother MFC-J491DW Online User's Manual page 588

Level 1 Level 2
Miscellaneous Area Code
(USA only)
[Network]
[Settings] > [All Settings] > [Network]
Level 1 Level 2
Wired LAN TCP/IP
(MFC-J895DW)
Ethernet
Wired Status
MAC Address
WLAN TCP/IP
Level 3 Descriptions
- Set your 3-digit area code only if you do not dial it
within your own area code.
Level 3 Level 4 Descriptions
BOOT Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server -
DNS Server -
APIPA -
IPv6 -
- -
- -
- -
BOOT Method -
IP Address
-
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server
-
DNS Server -
APIPA -
IPv6 -
Select the BOOT method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP
address from the link-local address
range automatically.
Turn the IPv6 protocol on or off. For
more information, go to the Brother
Solutions Center at support.brother.com
to see FAQs & Troubleshooting.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
Select the BOOT method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP
address from the link-local address
range automatically.
Turn the IPv6 protocol on or off. For
more information, go to the Brother
Solutions Center at support.brother.com
to see FAQs & Troubleshooting.
581