Home >
Fax
>
Receive a Fax
Use Your Remote Access Code
Related Models: MFC-J690DW/MFC-J895DW
1. When away from your Brother machine, dial your fax number from a touch-tone telephone or fax machine.
2. When your machine answers, immediately enter your three-digit Remote Access Code, followed by *.
3. Your Brother machine signals if it has received faxes:
•
One long beep - the machine received at least one fax
•
No beeps - the machine has not received a fax
4. When the machine gives two short beeps, enter a command.
•
The machine will hang up if you wait longer than 30 seconds to enter a command.
•
The machine will beep three times if you enter an invalid command.
5. When finished, press 9, and then press 0 to deactivate your machine.
6. Hang up.
This feature may not be available in some countries or supported by your local telephone company.
Related Information
•
Remote Fax Retrieval
•
Set a Remote Access Code
>
Remote Fax Retrieval
> Use Your Remote Access Code
235