Talking And Monitoring; Answering Doorphone Calls; Transferring Doorphone Calls; Monitoring The Outside With The Doorphone - Panasonic VL-MWD275 Operating Instructions Manual

4. Talking and monitoring

4.1 Answering doorphone calls

When you receive a call from a doorphone, the main
monitor, extension monitor, and sub monitor ring, and
display an image from the doorphone.
To answer the call
Press M N.
R Speak within about 50 cm of the microphone.
R Speak alternatively with the visitor. If you and the
visitor speak at the same time, you will not hear each
other.
R You can talk for up to about 90 seconds.
To end the call
Press M N.
Note:
R The display will turn off if you do not answer a call
within about 30 seconds.
R The displayed images are automatically recorded to
the main monitor (page 18).
Features available during incoming calls
– Monitoring feature (page 16)
Features available while talking
– Adjusting wide/zoom and pan/tilt settings
*1
(page 23)
– Turn on or off the operation guide (page 23)
– Adjusting sound and display settings (page 23)
– Using "press-to-talk" (page 16)
– Transferring calls to other devices (page 16)
*1 These functions are not available for the supplied
doorphone (VL-V524). You can use these functions
with optional doorphones (page 4).
Voice change (main monitor and extension monitor
only)
During incoming calls, press
using voice change.
R The feature makes the voice heard at the doorphone
sound deeper.
R For information about how to disable voice change,
see page 23.
Press-to-talk mode
If it is difficult for you and the visitor to hear each other
due to noise, the "press-to-talk" mode can make
conversations easier to hear.
1. While talking, activate press-to-talk mode by
pressing and holding M
R A beep sounds and
monitor) is displayed.
2. To speak to the visitor
Speak while pressing and holding M
R is displayed in yellow.
To listen to the visitor
Release M N.
16
to answer the call
N for about 2 seconds.
(or for the sub
N.
R is displayed in white.
Note:
R Press-to-talk mode is cancelled when the call ends.

4.2 Transferring doorphone calls

You can transfer a doorphone call between the main
monitor, sub monitor, and extension monitor.
To transfer a call
1. While talking with the visitor at the doorphone, press
M N.
2. If there are multiple devices, select the device to
transfer the call to ®
R To page all devices, select "Call all
together" ®
3. Page the other party.
4. When the paged party answers, ask them to receive
the call from the doorphone ® M
R To cancel transferring the call and talk to the
visitor again, press M
To receive a call
1. When the intercom call is received, press M
to talk to the paging party.
2. When the image from the doorphone is displayed,
talk to the visitor.
3. When finished, press M
Note:
R The visitor cannot hear voices during paging.
R When using the sub monitor to transfer calls or
receive transferred calls, extension monitors are
displayed as sub monitors in the list of available
devices and for the device name of incoming calls.
For example, "Extension monitor 1" is
displayed as "Sub monitor 1".
4.3 Monitoring the outside with
the doorphone
You can monitor the sounds and images from the
doorphone using the main monitor, extension monitor,
and sub monitor.
1
Press M N.
R If there are multiple doorphones, select the
desired doorphone ®
R The images from the doorphone are displayed.
2
Monitor the sound and image.
R You can talk to the monitored party by pressing
M N.
3
When finished, press M
.
.
N.
N.
N
N.
.
N.