General Information; Cleaning; Specifications - Panasonic VL-MWD275 Operating Instructions Manual

10. General information

10.1 Cleaning

Wipe the product with a soft, dry cloth.
For excessive dirt, wipe the product with a cloth slightly
dampened with fresh water.
Important:
R Do not use any cleaning products that contain
alcohol, polish powder, powder soap, benzine,
thinner, wax, petroleum, or boiling water. Also do
not spray the product with insecticide, glass
cleaner, hair spray or wall paint. This may cause
a change in colour or quality of the product.
Cleaning the charger:
For safety, disconnect the charger from the power supply
before cleaning.
Cleaning the sub monitor:
To avoid mistakenly operating the sub monitor, remove
its batteries before cleaning.

10.2 Specifications

Main monitor (VL-MWD275)
Power source R VL-MWD275BX/CX/ML:
R VL-MWD275AZ:
Power R VL-MWD275BX/CX/ML:
consumption
R VL-MWD275AZ:
Dimensions
Approx. 158´201´25
(mm) (height ´
(excluding protruding sections)
width ´ depth)
Mass (weight) R VL-MWD275BX:
R VL-MWD275CX/ML:
R VL-MWD275AZ:
32
220-240 V AC, 50/60 Hz
Power supply unit
(VL-PS241) 24 V DC, 0.6 A
Standby: 2.9 W
Operating: 13.7 W
Measurement conditions:
– VL-V524 (1 pc.) and
VL-WD619 (1 pc.) are
connected to
VL-MWD275.
Standby: 2.2 W
Operating: 14 W
Measurement conditions:
– VL-V524 (1 pc.) and
VL-WD619 (1 pc.) are
connected to
VL-MWD275.
Approx. 705 g
Approx. 760 g
Approx. 605 g
Operating Ambient temperature: approx.
environment 0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 17.8 cm (7.0 inches
wide colour display)
Talking method Hands-free
Installation Wall mount (mounting bracket
method supplied)
Frequency 1.88 GHz to 1.90 GHz
range
RF transmission Approx. 10 mW (average power
power per channel)
250 mW (max.)
Power supply unit (VL-PS241) (indoor use only)
Power source Input: 220-240 V AC, 0.2 A,
50/60 Hz
Output: 24 V DC, 0.6 A
Dimensions
Approx. 104´100´54
(mm) (height ´
(excluding protruding sections)
width ´ depth)
Mass (weight) Approx. 215 g
Operating Ambient temperature: approx.
environment 0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Installation Attach to DIN rail
method
Doorphone (VL-V524)
Power source Power supplied by the main
monitor
Dimensions
Approx. 152´102´35.5
(mm) (height ´
(excluding protruding sections)
width ´ depth)
Mass (weight) Approx. 225 g
Operating Ambient temperature: approx.
environment -15°C to +55 °C
Relative humidity
(non-condensing): up to 90 %
Viewing angle Horizontally: approx. 85°
Vertically: approx. 54°
Installation Surface mount (mounting base
method supplied)
Flush mount (flush mount box
sold separately)
Minimum 1 lx
illuminance
(within approx. 50 cm from the
required
camera lens)
Lighting method LED lights