Perkins 403J-E17T Operation And Maintenance Manual page 59

M0094137-02
Table 6
404J-E22T and 404J-E22TA Engines With a Balancer
Oil Pan
Refill Capacities
Compartment
Minimum
or System
4.97 L
Crankcase Oil
(1.313 US gal)
Sump (1)
Total Lubrication
System (2)
(1) More than one style of sump may be used on these engines.
Use these values to estimate the refill capacity. Use the engine
oil level gauge to fill the engine to the correct oil level. Record
the result in this table. These values are the approximate ca-
pacities for the Crankcase Oil Sump which includes the stand-
ard factory installed oil filters. Engines with auxiliary oil filters
will require more oil. Refer to the OEM specifications for the ca-
pacity of the auxiliary oil filter.
(2) The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity of factory installed oil fil-
ters and other filters added to the lubrication system. Enter the
value for the capacity of the Total Lubrication System in this
row.
Cooling System
To maintain the cooling system, the Total Cooling
System capacity must be known. The approximate
capacity is for the engine cooling system. External
System capacities will vary among applications.
Refer to the OEM specifications for the External
System capacity. This capacity information will be
needed to determine the amount of coolant that is
required for the Total Cooling System.
Table 7
403J-E17T Engine
Refill Capacities
Compartment or System
Engine Only
Total Cooling System (1)
(1) The Total Cooling System capacity with factory installed
radiator.
Table 8
404J-E22T
Refill Capacities
Compartment or System
Engine Only
Total Cooling System (1)
(1) The Total Cooling System capacity with factory installed
radiator.
Maximum
6.14 L
(1.622 US gal)
US gallons
Liters
3.7 0.98
TO BE CONFIRMED
US gallons
Liters
4.5 1.19
TO BE CONFIRMED
Table 9
404J-E22TA
Refill Capacities
Compartment or System
Engine Only
Total Cooling System (1)
(1) The Total Cooling System capacity with factory installed
radiator.
Fluid Recommendations
(General Fuel Information)
• Glossary
• ISO International Standards Organization
• ASTM American Society for Testing and
Materials
• BTL
• CFPP
• CFR Co-ordinating Fuel Research
• CTL
• DPF
• EPA Environmental Protection Agency of
the United States
• FAME
• GTL
• HFRR High Frequency Reciprocating Rig
for Lubricity testing of diesel fuels
• HVO
• PPM
• RME
• SME
• ULSD
• v/v (volume of solute)/(volume of solution)
59
Maintenance Section
Fluid Recommendations
US gallons
Liters
4.5 1.19
TO BE CONFIRMED
i07818799
Biomass to liquid
Cold Filter Plugging Point
Coal to liquid
Diesel Particulate Filter
Fatty Acid Methyl Esters
Gas to liquid
Hydrotreated Vegetable Oil
Parts Per Million
Rape Methyl Ester
Soy Methyl Ester
Ultra Low Sulfur Diesel