General Information; Snowmobile Identification; Control Locations - Yamaha SR10ARLG Owner's Manual

Snowmobile Identification

The snowmobile has two important iden-
tification numbers. The Vehicle Identifi-
cation Number (VIN) is stamped into the
tunnel near the right-side footrest and on
a decal beneath the seat. The decal also
displays pertinent production informa-
tion. The Engine Serial Number (ESN) is
stamped into the crankcase of the engine.
VIN
Brake Lever Lock
Brake Lever
Headlight Dimmer Switch
Thumb Warmer/
Handlebar Warmer Switches
Seat Warmer Switch (if equipped)
Tether Switch (if equipped)
Brake Lever Lock
Brake Lever
Headlight Dimmer Switch
Thumb Warmer/
Handlebar Warmer Switches
Seat Warmer Switch (if equipped)
3

General Information

0726-383
SR10 Models
Accessory Outlet
SR10 Long Track Models
Accessory Outlet
These numbers are required by the dealer
to complete warranty claims properly. No
warranty will be allowed by Yamaha Inc.
if the engine serial number or VIN is
removed or mutilated in any way.
Always provide the snowmobile name,
VIN, and ESN when contacting an autho-
rized Yamaha Snowmobile dealer for
parts, service, accessories, or warranty. If
the complete engine must be replaced,
ask the dealer to notify Yamaha for cor-
rect registration information.

Control Locations

Shown are the typical control locations
for Yamaha snowmobiles. Location of a
specific control will vary according to
model.
Emergency Stop Switch
Reverse Switch
Emergency Stop Switch
Reverse Switch
Throttle Lever
Ignition Switch
Heated Shield Outlet
(if equipped)
0749-256
Throttle Lever
Ignition Switch
0749-257