Working On Adverse Slopes; Lift Float Kit (Optional) - Bush Hog RMB 1660 Operator's Manual

Rear-mount boom mower

Table of Contents

OPERATION

12.1 Working on Adverse Slopes

When working high with the reach fully extended, it

is possible for the main arm balance to go 'Over-

Center' and take the weight off the lift cylinder. A

restrictor in the gland connection of the lift ram

prevents sudden unpredictable movements should

this occur.

NOTE: Always inspect the work area prior to cutting

to remove hazardous material and note any

immovable objects.

Fitting Location

The hydraulic float kit should be mounted to the

special bracket in such a position that it does not

foul any other component during the slewing

motion.

RMB 1660 11/10

Operation Section 4-25

Table of Contents