Hedge Cutting Procedure - Bush Hog RMB 1660 Operator's Manual

OPERATION

12. Hedge Cutting Procedure

Cut the side and bottom of the field side first. This leaves
the maximum thickness of hedge on the road side to
prevent the possibility of any debris being thrown through
the hedge into the path of oncoming vehicles.
Cut the side and bottom of the road side.
Top cut the hedge to the height required.
NOTE: Never cut over the far side of the hedge. It is
impossible to see any potential hazards and the position of
the flail head will allow the possibility of debris being
thrown through the hedge towards the tractor and operator.
RMB 1660 11/10 Operation Section 4-24
© 2010 Alamo Group Inc.