Bush Hog RMB 1660 Operator's Manual page 46

Check that the welded in pins between the stabilizers jaws are in contact with the mounting rail. If not the
machine must be lowered to the ground and the next higher hole on the stabilizer valve selected, the machine
raised and contact checked. Repeat again in the third hole if necessary. On subsequent fitting to the same
tractor the hole selected is always used.
• Adjust the top link to bring the frame of the
machine into the vertical position.
RMB 1660 11/10
© 2010 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-8