Mainboard Installation - Acer Aspire 5333 Service Manual

Mainboard Installation

1. Align mainboard to lower cover.
2. Connect DC-IN cable (M) to mainboard connector (N)
!
CAUTION:
Use caution when installing mainboard. Forced installation may damage left side
connectors.
3. Install board by sliding connectors at left side of board at a slight angle into slots on left
side of lower cover (Figure 3-34).
Figure 3-34. Mainboard
4. Install and secure following screws
 screw (J) to mainboard
 three (3) screws (K) to fan module
5. Connect following cables
 microphone cable (A) to mainboard connector (E)
 LVDS cable (G) to mainboard connector (H) white marker (P) side up
 USB module cable (B) to mainboard connector (D)
 ODD board cable (F) to mainboard connector (C)
6. Install upper cover.
ID
J,K M2.5x5
3-32
(Figure 3-31):
Size
(Figure
(Figure 3-31):
Quantity
4
Machine Maintenance Procedures
3-33).
Screw Type
0