Thermal Module Removal
Prerequisite:
!
CAUTION:
Thermal module may be hot.
1. Remove four (4) screws (B) from module (A).
Figure 3-36. Thermal Module
2. Remove module.
Thermal Module Installation
+
IMPORTANT:
The following thermal grease types are approved for use:
N302 I-Connosseur
Honeywell
The following thermal pads are approved for use:
Eapus XR-PE
1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and
Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU (B)
3-34
Mainboard Removal
3
2
Apply approved thermal grease and make sure all heat pads are in place
before replacing module.
A
B
1
4
B
Machine Maintenance Procedures
(Figure
3-37).
0
0