4. Remove module (A) from mylar (C) and brackets.
C
Figure 3-10. HDD Brackets
HDD Module Installation
1. Install module (A) into brackets (F) and mylar (C) (Figure 3-10).
2. Install and secure module to brackets with four (4) screws (E) (Figure 3-10).
3. Use tab on mylar (C) to insert module into bay
4. Connect module (A) to mainboard connector
5. Install and secure screws (D) into module (A)
6. Install lower logic door.
ID
D
M2.45x8
E
M2x3 Ni
Machine Maintenance Procedures
E
A
E
Size
(Figure
3-9).
(Figure
3-9).
(Figure
3-8).
Quantity
1
4
F
0
Screw Type
3-13