Table of Contents
Advertisement
•
The state of DSP resource usage can be outputted as a CSV file by clicking Export.
PC Programming Manual References
9.2 Control Box Configuration—[1-1] Configuration—Slot—System Property—Main—DSP CODEC G.711
only (SIP extension)
9.8 Control Box Configuration—[1-5] Configuration—DSP Resource
Feature Manual References
3.2 System and Subscriber Features
4.2.1 SIP (Session Initiation Protocol) Extension
4.4.3 Automatic Time Adjustment
Description
It is possible to adjust the Control Box's clock automatically in the following two ways:
a.
Summer Time (Daylight Saving Time) Setting:
The start and end dates of the summer time can be programmed. The clock will be adjusted (one hour
forward or backward) at 2:00 AM of the programmed date, if enabled through system programming. It
means 2:00 AM will become 3:00 AM on the start date of the summer time, and 2:00 AM will become
1:00 AM on the end date.
b.
Time Information through Network Time Protocol (NTP):
By connecting the Control Box to an NTP server, it is possible to receive and update the time setting.
The clock will be adjusted every day at 3:05 AM, if enabled through system programming.
Conditions
•
SMDR will record the call information using the Control Box clock so that the recording time will be
overlapped at the end of summer time.
PC Programming Manual References
10.1.1 Control Box Configuration—[2-1-1] System—Date & Time—Date & Time Setting
10.1.2 Control Box Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving—Automatic Time
Adjustment—Automatic Time Correction on Stand-alone mode
10.1.2.1 Control Box Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving—Daylight
Saving
Feature Manual References
2.6.1.1 Station Message Detail Recording (SMDR)
4.4.4 Dynamic Host Configuration Protocol (DHCP) Server
Description
The Control Box has a built-in DHCP server. When the DHCP server is enabled, the Control Box will
automatically assign IP addresses to other devices on the network, such as extension telephones.
Using a DHCP server simplifies network management by removing the need to assign IP addresses to
devices manually.
Conditions
•
The DHCP Server feature cannot be used if the Control Box's IP address assignment mode is set to
DHCP.
4.4.3 Automatic Time Adjustment
Feature Manual
41
Advertisement
Table of Contents
