Table of Contents
Advertisement
PC Programming Manual References
8.1.1 Users—User Container—Add User/Edit User
2.7.2.2 Sub Device
Description
1.
Outbound call
•
Operations performed from a sub device are treated as if performed from the main device.
2.
Inbound call
[Parallel ringing]
–
Calls to the user also arrive on the sub device.
–
It is possible to send an incoming call signal to a sub device at a predetermined time delay from the
time of an incoming call to the main device.
–
When the incoming call to the main device is stopped by the receiver modification feature, the
incoming call to the sub device will also be stopped.
3.
Call
[Setting data between devices]
•
Sub devices operate based on the COS of the main device and/or the settings of each terminal.
Conditions
•
The settings of the main device are obeyed when receiving a call when already on a call. At this time the
incoming call is only displayed on the main device, however, by disconnecting the incoming call, the call
will be displayed on all the devices as configured in the delay settings. However, the call will immediately
arrive on the terminal on a call without applying the delay settings.
PC Programming Manual References
8.1.1 Users—User Container—Add User/Edit User
2.7.2.3 UM (Mailbox)
Description
•
By assigning a main extension when adding a user, a UM mailbox with the same the extension as the
user number will be created automatically, and it will automatically be associated with the user.
•
The mailbox cannot be generated from the UM settings (Mailbox settings menu). The mailbox can only be
generated as an effect of a user being generated.
Manager Mailbox
•
When a new message has been recorded in a user's mailbox, a new message indication is sent to all the
user's devices.
Conditions
•
The below listed information is automatically reflected to the mailbox registered to the user by the settings
configured in the User Container.
If you change the settings in the User Container, the settings of the mailbox will also be updated
accordingly.
The mailbox for the system manager will be automatically created during initial
start-up.
2.7.2 Call Control Feature
Feature Manual
23
Advertisement
Table of Contents
