Recalling Values From Memory; Clearing Values From Memory - HoMedics THERA P BPW-051DDM Manual

RECALLING VALUES FROM MEMORY

This monitor can be used by two individuals.
Each user can store up to 60 measurements.
1. Press the User-Select
button.
2. Choose User 1 or User 2.
3. Press the "M" button to
access the memory.
4. The monitor will first
display the calculated
average applied to the
last 3 memories.
5. Every new press of the
"M" button will recall a
previous reading. The
latest reading will be
recalled first.
START
STOP
START
STOP
25

CLEARING VALUES FROM MEMORY

1. Press the User-Select button to select
User 1 or User 2.
2. Continue to press the "M" button
for approximately 5 seconds, then the
data for the selected user will be
erased automatically.
START
STOP
START
Note: The data stored in memory for both
STOP
START
STOP
START
STOP
users may be erased if any of the
batteries are removed. (Users should
first record the data in a Blood
Pressure log before replacing or
removing batteries.)
26