Panasonic SA-HT650P Service Manual page 65

- To retrieve the code, turn on the power button so that the code F61
appears, however, is switched to time display after three seconds,
and the power is automatically turned off.
14.1.3. Description of Error Code
14.1.3.1. F61
- State, Condition
When the power is turned on, the unit is automatically turned off.
The power does not turn on.
- Cause, Troubleshooting
Power circuit system failure and/or direct current flown to speaker
terminal / Identify the cause and replace with new parts.
14.2. Memorized Error Codes
14.2.1. Activating Self-Diagnosis Function and Displaying Method
1. Turn on the power.
2. Select DVD/CD function. With no DVD/CD inserted in the player,
press and hold down the
press the "0" buttonon the remote control for at least two
seconds in order to display "DVD_F_ _ _ ".
3. Press the
self diagnosis is displayed. (Ex.: T H15) / If several errors are
detected, press the
14.2.2. Re-Display
- Press the power button to turn off the power, and then turn on the
power.
- The details of self diagnosis are stored in the unit memory. / To
retrieve them, follow the procedure described the above,
"Activating Self-Diagnosis Function and Displaying Method".
14.2.3. Deleting Details of Self Diagnosis
button. If a memorized error is detected, the result of
button to display each.
button for at least two seconds, and
Fig. 14-2