Step 13 : Rotate the lower spindle in the direction of arrow until the lower spinder interferes
with stopper.
Step 14 : Insert the thin tip of minus screwdriver between the lower spinder and UP/DOWN
base, and then slacken the lower spindle to release the stopper. Then, rotate the lower spinder
and remove it.
Step 15 : Rotate the UP/DOWN base at a 90 degree angle. Then, spread the hold bars of loading
stopper and remove the UP/DOWN base.
[Installation for loading stopper
ass'y]
Step 1 : Align the claw of loading stopper ass'y with the slot of spindle base. (Caution should
be exercised when alignment of claw due to the size of claws.