Removal Procedure Of Outdoor Unit - Lennox LI012CO-230P432 Service Manual

Service Manual

11.2 Removal Procedure of Outdoor Unit

18K
NOTE: Take heat pump for example.
Steps
1. Remove big handle,valve cover and top cover
a
Remove the screw connecting the big handle and
right side plate, and then remove the big handle.
Remove the screw connecting the valve cover and
right side plate, and then remove the valve cover.
b
Remove the screws connecting the top cover with
outer case, right side plate and left side plate; lift
the top cover upwards to remove it.
2. Remove grille and outer case
Remove the 4 screws connecting the grille and
outer case, and then remove the panel grille.
Installation and Maintenance
Warning: Be sure to wait for a minimum of 20 minutes after
turning off all power supplies and discharge the refrigerant
completely before removal.
Procedure
grille
big handle
valve cover
top cover
95