Lennox LI012CO-230P432 Service Manual page 104

Service Manual
Steps
4.Remove grille and panel
a
Twist off the screws connecting the grille and
panel, and then remove the grille.
Twist off the screws connecting the panel, chassis
b
and motor support with screwd-river, and then
remove the panel.
5.Remove right side plate
Twist off the screws connecting the right side
plate and chassis, valve support and condenser,
and then remove the right side plate.
6.Remove axial flow blade
Twist off the nuts on blade with wrench and then
remove the axial flow blade.
Installation and Maintenance
Procedure
grille
axial flow blade
panel
right side plate
101