Channel Preset - Subaru 2011 Forester Owner's Manual

Hide thumbs Also See for 2011 Forester:
Table of Contents

Advertisement

When in the category search mode, press
the following button to change the cate-
gory up or down.
Type A and B audio:
Category up by one
step
Category down by
one step
Type C audio:
Category up by one
step
Category down by
one step
When a category is selected, turning the
"TUNE/TRACK/CH" dial selects channels
only within the selected category.
The control function returns to the normal
mode after approximately 10 seconds.
! Type D audio
When in the SAT mode, press the
button to change the category search
mode.
When in the category search mode, press
the following button to change the cate-
gory up or down.
Category up by one
step
Category down by
one step
When a category is selected, turning the
"TUNE/TRACK/CH" dial selects channels
only within the selected category. The
control function returns to the normal
mode after approximately 10 seconds.
! Channel scan
Type A and B audio
Type C audio
Type D audio
Press the "SCAN" button briefly (type A, B
and C audio)/for more than 1.5 seconds
(type D audio) to change the radio to the
SCAN mode. In this mode, under the
selected category, the radio scans through
the channel until a station is found. The
Audio
radio will stop at the station for 5 seconds
while displaying the channel number, after
which scanning will continue until the
entire channel has been scanned from
the low end to the high end.
Press the "SCAN" button briefly (type A, B
and C audio)/for more than 1.5 seconds
(type D audio) again to cancel the SCAN
mode and to stop on any displayed
channel.
& Channel preset
! How to preset channels
1. Press the "SAT" button to select SAT1,
SAT2 or SAT3 reception.
2. Select the desired channel.
3. Press one of the preset buttons (from
to
) for more than 1.5 seconds
to store the channel. If the button is
pressed for less than 1.5 seconds, the
preceding selection will remain in memory.
NOTE
. Up to six SAT1, SAT2 and SAT3
channels each may be preset.
. If the connection between the radio
and battery is broken for any reason
such as vehicle maintenance or radio
removal, all channels stored in the
preset buttons are cleared. If this
– CONTINUED –
5-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forester 2011

Table of Contents