Select Lever - Subaru 2011 Forester Owner's Manual

7-16
Starting and operating
allow the transmission to shift at the
most appropriate times for the current
condition of your vehicle. Optimized
shifting will be restored as the vehicle
continues to be driven for a while.
& Select lever
: Shifting is possible with the brake pedal
depressed.
: Shifting is possible whether the brake
pedal is depressed or not. However,
while the ignition switch is in the "LOCK"
or "Acc" position, shifting is not possible
if the brake pedal is not depressed.
Depress the brake pedal and move the

select lever.

: Shifting is possible whether the brake
pedal is depressed or not.
The select lever has four positions, "P",
"R", "N", "D" and also has manual gate for
using "SPORT" mode or manual mode.
! P (Park)
This position is for parking the vehicle and
starting the engine.
In this position, the transmission is me-
chanically locked to prevent the vehicle
from rolling freely.
When you park the vehicle, first set the
parking brake fully, then shift into the "P"
position. Do not hold the vehicle with only
the transmission.
To shift the select lever from the "P" to any
other position, you should depress the
brake pedal fully then move the select
lever. This prevents the vehicle from
lurching when it is started.
! R (Reverse)
This position is for backing the vehicle.
To shift from the "N" to "R" position, stop
the vehicle completely then move the
lever to the "R" position.
When the ignition switch has been turned
to the "LOCK" position, movement of the
select lever from the "N" position to the "R"
position is possible for a limited time
period by depressing the brake pedal,
and then it becomes impossible. For
details, refer to "Shift lock function" F7-17.
! N (Neutral)
This position is for restarting a stalled
engine.
In this position the wheels and transmis-
sion are not locked. In this position, the
transmission is neutral; the vehicle will roll
freely, even on the slightest incline unless
the parking brake or foot brake is applied.
Avoid coasting with the transmission in
neutral. During coasting, there is no
engine braking effect.
WARNING
Do not drive the vehicle with the
select lever in the "N" (neutral)
position. Engine braking has no
effect in this condition and the risk
of an accident is consequently in-
creased.
NOTE
If the select lever is in the "N" position
when you stop the engine for parking,
you may not subsequently be able to
move it to the "R" or "P" position. If
this happens, turn the ignition switch to
the "ON" position. You will then be able
to move the select lever to the "P"
position. For details, refer to "Shift lock
function" F7-17.