Type A Seat Heater; Type B Seat Heater - Subaru 2010 Impreza Owner's Manual

1-6
Seat, seatbelt and SRS airbags
& Type A seat heater
HI – Rapid heating
1)
LO – Normal heating
2)
OFF – Off
3)
A) Left-hand side
B) Right-hand side
To turn on the seat heater, push the "LO"
or "HI" position on the switch, as desired,
depending on the temperature.
Selecting the "HI" position will cause the
seat to heat up quicker.
The indicator located on the switch illumi-
nates when the seat heater is in operation.
When the vehicle's interior is warmed
enough or before you leave the vehicle,
be sure to turn the switch off.
& Type B seat heater
Each seat heater has four levels of
adjustment. To use the heater in the
right-hand seat, turn the "R" adjustment
dial forward until the " " mark reaches the
desired position. To activate the heater in
the left-hand seat, turn the "L" adjustment
dial forward until the " " mark reaches the
desired position. Each heater warms the
seat most quickly with the " " mark on the
adjustment dial in the furthest-forward
position. An indicator light next to the
adjustment dial for each seat heater
illuminates when that seat heater is
activated.
When the vehicle's interior is warmed
enough or before you leave the vehicle,
always turn the adjustment dial to the
most rearward position so that the " "
mark reaches to the "OFF" position.