Radiator Replacement - Polaris RZR PRO XP 2020 Service Manual

ENGINE / COOLING SYSTEM

RADIATOR REPLACEMENT

REMOVAL
1. Remove front fascia. See Front Fascia Removal page
11.17.
2. Drain cooling system.
3. Remove four electrical connectors from the voltage
regulators.
4. Remove two fasteners
bracket and remove bracket/voltage regulators as an
assembly.
5. Remove six push pins
shroud.
6. Remove two large hoses and one vent line from the
charge air radiator and remove charge air radiator
from the vehicle.
3.36
q
securing voltage regulator
w
and remove the radiator
7. Remove two large hoses
radiator.
8. Cut zip ties retaining vent line to the fan shroud.
9. Remove two fasteners
to the vehicle.
10. Disconnect the electrical connector to the fan.
11. Pull upward on the fan to disconnect the assembly
from its lower mounting grommets. Remove fan and
radiator as an assembly.
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
e r
and vent line from the
t
retaining the fan assembly
© Copyright Polaris Industries Inc.