High Beam Indicator Light; Cargo Lamp Indicator Light; Cruise Control Set Indicator Light - Subaru 2006 Baja Owner's Manual

Instruments and controls

High beam indicator light

This light shows that the headlights are in the high
High beam indicator light Indicator light High beam
beam mode.
This indicator light also comes on when the headlight
flasher is operated.

Cargo lamp indicator light

Cargo Lamp indicator light
Do not switch on the cargo lamp while driving
to avoid distracting other drivers.
This indicator light shows that the cargo lamp comes
on.

Cruise control set indicator light

Set indicator light Cruise control
Non-turbo models
The light comes on when vehicle speed has been set.
Turbo models
The cruise set indicator light comes on when the igni-
tion switch is turned to the "ON" position and goes out
after approximately three seconds.
The light comes on when vehicle speed has been set.
3-18
NOTE
If you move the cruise control lever or press the
main switch button while turning the ignition
switch "ON", the cruise control function is deacti-
vated and the cruise control set indicator light
flashes. To reactivate the cruise control function,
turn the ignition switch back to the "ACC" or
"LOCK" position, and then turn it again to the
"ON" position.
If this indicator light and the "
light flash simultaneously during driving, have the
vehicle checked by your nearest SUBARU dealer.
" indicator