Wireless Security Settings; Wep - EnGenius ENH Series User Manual

8.2 Wireless Security Settings

The Wireless Security Settings section lets you configure the EOH200's security modes: WEP,
WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. We strongly
recommend you use WPA2-PSK.

8.2.1 WEP

Security Mode
Auth Type
Input Type
Key Length
Default Key
as its default.
Key1
Key2
Key3
Key4
Select WEP from the drop-down list to begin the configuration.
Select Open System or Shared.
Select an input type of Hex or ASCII.
Level of WEP encryption applied to all WEP keys. Choices are
Select a 64/128/152-bit password lengths.
Specify which of the four WEP keys the OM2P-LC/OM2P-HS uses
Specify a password for security key index No.1. For security, each
typed character is masked by a dot (
Specify a password for security key index No.2. For security, each
typed character is masked by a dot (
Specify a password for security key index No.3. For security, each
typed character is masked by a dot (
Specify a password for security key index No.4. For security, each
typed character is masked by a dot (
).
●
).
●
).
●
).
●