Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
G
: Turn and Lane-Change Signals
5 3
: Headlamp High/Low-Beam Changer
O
: Exterior Lamp Control
Flash-to-Pass.
Information for these features is on the pages following.
Turn and Lane-Change Signals
Move the lever all the way up or down to signal
a turn. When the turn is finished, the lever will return
automatically.
Raise or lower the lever until the indicator arrow on the
instrument panel starts to flash to signal a lane change.
Hold it there until the lane change is completed. The lever
will return by itself when it is released.
As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and other
drivers will not see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when you
signal a turn, check the fuse, see Fuses and Circuit
Breakers on page 5-91 and for burned-out bulbs.
An arrow on the instrument
panel cluster flashes in the
direction of the turn or
lane change.
3-7