Table of Contents
Advertisement
Image settings
Sets the image displayed on the screen when the
power is turned on or no signal is input.
[Image settings] - submenu screen
Image settings
Startup image settings
No signal image settings
[Startup image settings]:
Sets the image displayed when the power is turned on.
[No signal image settings]:
Sets the image displayed when there is no signal at
the selected input terminal.
Conditions of the image that can be set in [Read
user image]
●
Image size: 1920 × 1080 only
●
jpg files / bmp files (except for the ones that cannot
be played back with USB media player (see page
79))
●
jpg files (Applies only to a no-signal image of
3.5 MB or less in file size.)
File and folder names are displayed on the file list with
conditions as below.
‒ I f a file or folder is placed directly under the root
directory of the USB device.
●
Up to 246 characters of file name (including the
extension) are properly displayed.
Note that the file list may disappear due to the
display time of the on-screen menu before the
entire display of file names completely appears.
●
Up to 244 characters of folder name are properly
displayed.
If the folder is placed hierarchically, the number
•
of characters displayed decreases by the number
of characters for the file path (folder information).
‒ O nly the files with file names described with ASCII
characters excluding control code are displayed.
Note
●
[Picture] cannot be adjusted when setting the startup
image.
●
Only [Backlight] and [Colour temperature] can be
adjusted when setting the no-signal image.
●
Images displayed for the startup image and no-signal
image may slightly differ from images confirmed on
the computer.
■
[Startup image settings] /
[No signal image settings]
Operate [No signal image settings] in the same way
as [Startup image settings].
[Startup image settings] - submenu screen
Startup image settings
Display setting
Image select
Read user image
Clear user image
[Display setting]
Sets the image display when the power is turned on.
[Off]: The function does not operate.
[On]: Enables the function.
Note
●
When no-signal image is displayed, the screen
position moves at certain intervals and images are
displayed to alleviate burn-in on the LCD panel.
●
Shifts the display position regardless of the setting
of [Wobbling] (see page 50).
●
When this function is operating, part of the screen
may appear to be missing.
[Image select]
Select the image to display.
[Default image]: Panasonic logo (blue background)
[User image]: Image registered by the user
Note
●
Only when [Default image] is displayed, the logo
automatically rotates when displayed, according
to the [Display orientation] (see page 56) setting
([Landscape] / [Portrait]).
●
When [User image] is selected, the image does not
rotate according to the [Display orientation] setting.
Prepare an image of 1920 × 1080 aspect ratio
compatible with the installation direction.
●
[Default image] of [No signal image settings] is the
Panasonic logo (black background).
[Read user image]
Register the image read from a USB memory device.
[Read user image] - submenu screen
Read user image
Select a no signal image.
usb/picture/
..
0_folder_sample
g_sample
z_sample
1sample.jpg
2sample.jpg
3sample.jpg
a_sample.jpg
j_sample.jpg
v_sample.jpg
On
User image
English
49
Advertisement
Table of Contents
