■
Function button guide
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
●
When <FUNCTION GROUP> is pressed, [Function
button guide] will be displayed regardless of the [On]
/ [Off] settings.
■
To use shortcut (numeric buttons)
1
Press <FUNCTION GROUP> or <0> -
<9>.
[Function button guide] will be displayed.
[Function button guide]: When [Off] is set, pressing
the numeric button starts operation.
Example: Input
1.
HDMI
2.
DisplayPort
3.
DIGITAL LINK
4.
DVI-D1
5.
DVI-D2
6.
PC
7.
COMPONENT
8.
VIDEO
9.
USB
0. ---
2
Press <FUNCTION GROUP> to switch
function group.
Example: Memory load
Memory load
1.
MEMORY1
2.
MEMORY2
3.
MEMORY3
4.
MEMORY4
5.
MEMORY5
6.
MEMORY6
7. MEMORY7
8. MEMORY8
9. ---
0. ---
74
English
Input
3
Press <0> - <9>.
The function for the pressed button starts to operate.
Example: When <2> is pressed.
Memory load
Load from "MEMORY2"
Ok
Startup image settings
Sets the image displayed on the screen when the power
is turned on.
Conditions of the image that can be set in [Read
user image]
Image size: 1920 × 1080 only
•
jpg files / bmp files (except for the ones that cannot
•
be played back with [USB media player] (see
page 99))
File and folder names are displayed on the file list with
conditions as below.
‒ I f a file or folder is placed directly under the root
directory of the USB device.
Up to 246 characters of file name (including the
•
extension) are properly displayed.
Note that the file list may disappear due to the
display time of the on-screen menu before the
entire display of file names completely appears.
Up to 244 characters of folder name are properly
•
displayed.
If the folder is placed hierarchically, the number of
*
characters displayed decreases by the number of
characters for the file path (folder information).
‒ O nly the files with file names described with ASCII
characters excluding control code are displayed.
Note
●
[Picture] cannot be adjusted when setting the startup
image.
●
Image displayed for the startup image may slightly
differ from image confirmed on the computer.
[Startup image settings] - submenu screen
Startup image settings
Display setting
Image select
Read user image
Clear user image
Cancel
On
User image