Toshiba PORTEGE Z20t-C Series User Manual page 84

1. HDMI™ Micro port
Do not plug/unplug an HDMI™ device under the following conditions:
When you connect a television or external monitor to the HDMI™ port, the
display output device is set to HDMI™.
When you unplug the HDMI™ cable and replug it, wait at least 5 seconds
before you replug the HDMI™ cable again.
When you change the display output device, the playback device might not
switch automatically. In this case, To set the playback device to the same
device as the display output device, adjust the playback device manually
by the following steps:
1. Click Start -> Control Panel -> Hardware and Sound -> Sound.
2. In the Playback tab, select the playback device which you want to
switch to.
3. To use the internal speakers on your computer, select Speakers. To use
the television or the external monitor that you have connected to the
computer, select a different playback device.
4. Click the Set Default button.
5. Click OK to close the Sound dialog.
Settings for display video on HDMI™
To view video on the HDMI™ display device, be sure to configure the
following settings otherwise you might find that nothing is displayed.
Be sure to use the function key to select the display device before starting
to play video. Do not change the display device or audio device while
playing media files.
Do not change the display device under the following conditions.
User's Manual
Figure 4-20 Connecting the HDMI™ Micro port
The system is starting up.
The system is shutting down.
While data is being read or written
While communication is being carried out
1 2
2. HDMI™ cable (Type D connector)
4-27