Toshiba Pc Health Monitor - Toshiba PORTEGE Z20t-C Series User Manual

Table of Contents

Metal paper clips or hair pins/clips can generate heat if they come into

contact with USB ports. Do not allow USB ports to come into contact with

metal products, for example when carrying the computer in your bag.

Starting the TOSHIBA Sleep Utility

To start the utility, click Start -> All Programs -> TOSHIBA -> Tools &

Utilities -> Sleep Utility.

Enabling Sleep and Charge

This utility can be used to enable and disable the Sleep and Charge

function.

Select the Enable Sleep and Charge check box to enable this function for

the compatible USB ports. The default state is disabled.

Power supply mode settings

Your PC has multiple charging modes so that many different USB devices

can be supported for Sleep and Charge function. Auto Mode (Default) is

suitable for a wide range of digital audio players.

However, determining which mode is suitable for your USB device is

unknown without trying. Try each mode, using the following procedure,

from Auto Mode to Alternate Mode to find the suitable mode for your USB

device to charge.

This function might not be able to be used with some connected external

devices even if the appropriate mode is selected. In this situation, clear the

"Enable Sleep and Charge" check box and stop using this function.

Battery Settings

This utility can be used to specify the lower limit of remaining battery life for

Sleep and Charge. Move the slider bar to specify the lower limit. If the

remaining battery life falls below the setting, the Sleep and Charge function

will be stopped. Clearing the "Enable under Battery Mode" check box sets

the utility to only charge when the AC adaptor is connected.