Toshiba Setup Utility - Toshiba PORTEGE Z20t-C Series User Manual

enabled, the TOSHIBA PC Health Monitor screen is displayed, and the
program begins monitoring system functions and collecting information.
A message is displayed if any changes which might interfere with the
operation of the program are detected. Follow the instructions displayed
on-screen in the message.

TOSHIBA Setup Utility

TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu-
based user interface so that you can easily view and change BIOS
settings.
To enter the BIOS setup utility, do the following:
1.
2.
3.
The BIOS setup utility can also be launched by button combination.
1.
2.
3.
To save the changes and exit the utility, press the F10 key and proceed by
selecting Yes or select Exit -> Exit Saving Changes -> Yes. The
computer restarts immediately.
Navigating the utility
TOSHIBA Setup Utility can be navigated through the touch screen or the
provided Stylus Pen.
Some buttons on the tablet computer are also designated to execute the
corresponding key function on the keyboard. Details are described as
follows:
Button
Windows
Volume up
Volume down
User's Manual
Save your work.
Click Start. Point to the arrow (
then select Restart.
Hold down the F2 key and then release this key one second after the
computer is power on.
Without the keyboard dock, you can hold down the Volume down
button until TOSHIBA Setup Utility is loaded after the computer is
power on.
Save your work.
Click Start and then select Shut down.
While holding down the Volume down button, press the Power button
to turn on the power. Release the Volume down button after
TOSHIBA Setup Utility is loaded.
Key
Enter key
Up arrow key
Down arrow key
) beside the Shut down button and
Function
Proceed or confirm
operation
Select the previous item
Select the next item
5-13