Toshiba PORTEGE Z20t-C Series User Manual page 42

If you have previously chosen to remove the recovery partition and are
trying to create "Recovery Media", the following message appears: "The
Recovery Media Creator can not be launched because there is no recovery
partition."
When there is no recovery partition, the Recovery Media Creator cannot
make Recovery Media.
However, if you have already created a "Recovery Media", you can use it
to restore the recovery partition.
If you have not created "Recovery Media", contact TOSHIBA support for
assistance.
Restoring the pre-installed software from the
Recovery Partition
A portion of the total internal storage space is configured as a hidden
recovery partition. This partition stores files which can be used to restore
pre-installed software in the event of a problem.
If you set up your internal storage again later, do not change, delete, or add
partitions in a manner other than specified in the manual, otherwise you
might find that space for the required software is not available.
In addition, if you use a third-party partitioning program to reconfigure the
partitions on your internal storage, you might find that it becomes
impossible to set up your computer.
When you reinstall the Windows operating system, the internal storage will
be reformatted and all data will be lost.
1.
2.
3.
User's Manual
Make sure that the AC adaptor is connected during the restoring
process.
Make sure to dock the tablet computer to TOSHIBA Keyboard Dock
before restoring the operating system (only for Z20t-C).
Do not close the display panel during the restoring process (only for
Z20t-C).
Click Start. Point to the arrow (
then select Restart.
Hold down 0 (zero) key and then release this key one second after the
computer is power on.
Follow the on-screen instructions to finish the recovery.
) beside the Shut down button and,
2-20