4. Once the opener is installed, use the pegs inside the
compartment door to make sure the button on the
compartment door will contact the control button on
your garage door opener when pressed.
3. To make sure the button on your garage door opener
is centered above the button on the compartment
door, use the intersecting lines on the Velcro@ inside
the compartment as a guide. Center the control
button of your garage door opener over the point
where the lines intersect, and press the opener firmly
into place. Make sure the button is facing down.
5. Add one peg at a time until your garage door opener
operates with the compartment door closed when
you press the button.
2-52