Optional Accessories - Sony DVS-7150 Operation Manual

Optional Accessories

Processor accessories
BKDS-7110 Blank Input Adaptor Board
Can accept up to 12 BKDS-7111/7113 boards.
When a BKDS-7111 is installed: becomes an NTSC
analog composite input adaptor board, for use in
composite systems.
When a BKDS-7113 is installed: becomes a serial
digital input adaptor board, for use in composite
or component systems.
When both BKDS-7111 and BKDS-7113 are
installed: becomes an input adaptor board for the
simultaneous input of both serial digital signals
and NTSC analog composite signals, for use in
composite systems.
Up to two boards can be installed in the switcher.
BKDS-7111 Analog Composite Input Board
When installed on the BKDS-7110, forms an NTSC
analog composite input adaptor board. One BKDS-
7111 provides input capability for one channel.
BKDS-7113 Serial Digital Input Board
When installed on the BKDS-7110, forms a serial
digital input adaptor board. One BKDS-7113 provides
input capability for one channel.
BKDS-7134 Chromakey Analog Component
Input Board
Provides input capability for foreground chroma key
signals, for use in composite or component systems.
One BKDS-7134 provides input capability for two
channels of either RGB or Y/R–Y/B–Y signals. Only
one board can be installed in the switcher.
BKDS-7161 Analog Composite Output Board
Provides output capability for NTSC analog composite
signals, for use in composite systems. One BKDS-
7161 provides output capability for one channel. Up
to ten of these boards can be installed in the switcher.
BKDS-7163 Serial Digital Output Board
Provides output capability for serial digital signals, for
use in composite or component systems. One BKDS-
7163 provides output capability for one channel. Up
to ten of these boards can be installed in the switcher.
BKDS-7280 M/E Preview Board
Enables key preview (K-PVW) outputs from the AUX
BUS OUTPUTS, PVW OUTPUTS and ME
OUTPUTS connectors which can be used for M/E
preview outputs. One each for the M/E bank and
PGM/PST bank can be used, to a total of two.
BKDS-2031 Chromakey Board
Provides chroma key processing, for use in composite
or component systems. One board can be installed,
with the following functions:
• 4:4:4 input (foreground)
• Oversampling processing
• Auto chroma keying
• Color modification (foreground)
• Mask generation
BKDS-M1690 Redundant Power Supply Unit
A backup power unit for the switcher.
Control panel accessories
BKDS-7017 Switcher Control Panel
• Source name indications for M/E, PGM/PST, and
AUX bus banks
• Internal 3.5-inch floppy disk drive
• May be fitted with optional memory recall, DME,
and key frame control panels. (The optional BKDS-
7075 Control Panel Remote Adaptor is necessary for
connection.)
• DSK control panel fitted as standard
• Power supply unit (single) fitted as standard
5(E)