Mazda 2010 CX-9 Owner's Manual page 396

CX-9_8AU2-EA-09G_Edition1 Page396
Wednesday, July 8 2009 12:10 AM
Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
3. (Type A)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, or select phone.
(Type B/Navigation system)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Pairing options
5. Prompt: Select one of the following:
Pair, edit, delete, or list.
6. Say: [Beep] Edit
7. Prompt: Please say 1 for XXXXX...
(Ex. device A), 2 for XXXXX... (Ex.
device B...), which device please?
(The device tag of the registered device
is read out by the HFP.)
8. Say: [Beep] X (Say the number of
the device to be edited.)
9. Prompt: New name please?
10. Say: [Beep] XXXXX... (Ex. device
C) (Speak a device tag , an
arbitrary name for the device.)
11. Prompt: XXXXX... (Ex. device C)
(Device tag), is this correct?
12. Say: [Beep] Yes
13. Prompt: New name saved, returning
to main menu.
qSecurity Setting
If a passcode is set, the system cannot be
activated unless the passcode is input.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
6-152
Form No.8AU2-EA-09G
Black plate (396,1)
Passcode setting
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
Telephone or Phone .
2. Say: [Beep] Setup
3. (Type A)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, or select phone.
(Type B/Navigation system)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Passcode
5. Prompt: Passcode is disabled. Would
you like to enable it?
6. Say: [Beep] Yes
7. Prompt: Please say a 4-digit passcode.
Remember this passcode. It will be
required to use this system.
8. Say: [Beep] XXXX (Say a desired 4-
digit passcode, PCode .)
9. Prompt: Passcode XXXX (Passcode,
PCode). Is this correct?
10. Say: [Beep] Yes
11. Prompt: Passcode is enabled,
returning to main menu.